Lean manufacturing: practice used by technology-based companies on the Colombian Caribbean coast

Authors

DOI:

https://doi.org/10.36390/telos282.12

Keywords:

Lean manufacturing, technology-based firms, continuous improvement, operational efficiency, Colombian Caribbean

Abstract

Technology-Based Companies (EBTs) are fundamental for regional economic and innovative development thanks to their ability to integrate scientific and technological knowledge into their production processes. Operational efficiency is decisive for its sustainability and competitiveness, which highlights the need to identify resource optimization methodologies. In this context, the present study focused on identifying the Lean Manufacturing practices used by this type of companies in the Colombian Caribbean Coast region. Theoretically, the research was based on Lean Manufacturing as a comprehensive management system focused on continuous improvement, waste elimination and process optimization. Methodologically, a quantitative approach was used, with a non-experimental, descriptive and cross-sectional design. A structured questionnaire of 25 items was applied to an intentional sample of 30 EBT Managers. The results revealed a general implementation average of 3.96 (with a standard deviation of 0.82), highlighting the Kaizen, Total Productive Maintenance (TPM) and Change Per Minute Metric (SMED) methodologies as the most consolidated. It is concluded that the EBTs in the region have made significant progress in the adoption of Lean practices. However, areas for improvement are identified, particularly in strengthening the culture of order, discipline and continuous improvement.

Views: 706Downloads: 556

Downloads

Download data is not yet available.

Author Biographies

References

Agurto Murillo, J. L. (2018). Gestión de operaciones para mejorar la competitividad operacional – Caso Empresa de Transportes Cotera Cargo S.A.C. Ate, Año 2018 [Tesis de pregrado, Universidad César Vallejo]. Repositorio Institucional UCV. https://hdl.handle.net/20.500.12692/48665

Antony, J. (2006). Six Sigma for service processes. Business Process Management Journal, 12(2), 234–248. https://doi.org/10.1108/14637150610657558 DOI: https://doi.org/10.1108/14637150610657558

Attri, R., Grover, S., Dev, N., & Kumar, D. (2013). Analysis of barriers of total productive maintenance (TPM). International Journal of System Assurance Engineering and Management, 4(4), 365–377. https://link.springer.com/article/10.1007/s13198-012-0122-9 DOI: https://doi.org/10.1007/s13198-012-0122-9

Audretsch, D. B., Cunningham, J. A., Kuratko, D. F., Lehmann, E. E., & Menter, M. (2019). Entrepreneurial ecosystems: economic, technological, and societal impacts. The Journal of technology transfer, 44(2), 313-325. https://link.springer.com/article/10.1007/s10961-018-9690-4 DOI: https://doi.org/10.1007/s10961-018-9690-4

Baker, B. (2003). Lean Six Sigma: Combining Six Sigma Quality With Lean Speed. Quality Progress, 36(10), 96. https://www.proquest.com/openview/8ca0bc0b8826dbacf3eaa15f66fe8487/1?pq-origsite=gscholar&cbl=34671

Bernal, C. A. (2016). Metodología de la investigación: Administración, economía, humanidades y ciencias sociales (4.ª ed.). Pearson Educación. https://www.academia.edu/44228601/Metodologia_De_La_Investigaci%C3%B3n_Bernal_4ta_edicion

Bonilla, B. C., Yepes, O. J. M., & Sur, R. C. (2025). Implementación de Lean Manufacturing: estudio de caso sobre la optimización de procesos y la mejora de la productividad en Are’pique y las delicias de la negra, microempresas del sector alimenticio de la ciudad de Ibagué en el 2025 [Tesis de maestría, Corporación Universitaria Minuto de Dios]. Repositorio Institucional UNIMINUTO. https://repository.uniminuto.edu/server/api/core/bitstreams/8c11803c-acf1-4bb5-9f0d-e18baccf4ad9/content.

Buer, S. V., Strandhagen, J. O., & Chan, F. T. S. (2018). The coupling between Industry 4.0 and lean manufacturing: A literature review. International Journal of Production Research, 56(8), 2920–2939. https://doi.org/10.1080/00207543.2018.1442945 DOI: https://doi.org/10.1080/00207543.2018.1442945

Carreño, D., Amaya, L., & Ruíz, E. (2018b). Herramientas de Lean Manufacturing en las industrias de Tundama. Ingeniería Industrial. Actualidad y Nuevas Tendencias, 6(21), 49–62. https://www.redalyc.org/articulo.oa?id=215058535004

Centeno, FH, & Huayanay, WS (2022). Manufactura esbelta: revisión de la literatura y análisis de la implementación. Journal of Scientific and Technological Research Industrial , 3 (2), 36-46. file:///C:/Users/pc/Documents/ARTICULOS/Articulos%20de%20Yellitza%202025/Articulo%20pasado%20por%20arbitraje/Articulos/2020_03_02_04.pdf

Creswell, JW y Creswell, JD (2017). Diseño de investigación: Enfoques cualitativos, cuantitativos y de métodos mixtos . Publicaciones Sage. https://books.google.com.co/books?hl=es&lr=&id=335ZDwAAQBAJ&oi=fnd&pg=PT16&dq=Creswell,+J.+W.,+%26+Creswell,+J.+D.+(2022).+Research+Design:+Qualitative,+Quantitative,+and+Mixed+Methods+Approaches+(6th+ed.).+SAGE+Publications&ots=YEzVHPvpsN&sig=w9d_7tu7iv5T-3PmlRzE4Tb5Deg&redir_esc=y#v=onepage&q&f=false

Dupuis, M., & Massicotte, A. (2025). ¿Las nuevas tecnologías empoderan a los trabajadores? Producción digital ajustada y reorganización del trabajo en la industria manufacturera. Trabajo y ocupaciones , 52 (3), 417-446. https://doi.org/10.1177/07308884241288580 DOI: https://doi.org/10.1177/07308884241288580

Favela, M. K. I., Escobedo, M. T., Romero, R., & Hernández, J. A. (2019). Herramientas de manufactura esbelta que inciden en la productividad de una organización: modelo conceptual propuesto. Revista Lasallista de Investigación, 16(1), 115–133. https://www.redalyc.org/journal/695/69563162008/69563162008.pdf

Fernandez, J. A. B. (2023). Aplicación de herramientas Lean Manufacturing (5S, Andon y Tiempo Estándar) para el aumento de la productividad en el área de producción de una empresa metalmecánica. Industrial Data, 26(1), 217-245. https://www.redalyc.org/journal/816/81676820012/81676820012.pdf DOI: https://doi.org/10.15381/idata.v26i1.24580

Ferrer-Blas, R. I., Galarcep-Barba, I., & Solano-Gaviño, J. C. (2024). Lean Manufacturing en la producción de alimentos: Revisión sistemática, análisis bibliométrico y propuesta de aplicación. Scientia Agropecuaria, 15(4), 569-579. https://revistas.unitru.edu.pe/index.php/scientiaagrop/article/view/6091 DOI: https://doi.org/10.17268/sci.agropecu.2024.042

Ford, H. (1922). My life and work. Doubleday, Page & Company.

Guerrero, M., Urbano, D., & Fayolle, A. (2022). Entrepreneurial universities and regional innovation: A systematic literature review. The Journal of Technology Transfer, 47(4), 1231–1274. https://link.springer.com/article/10.1007/s11187-023-00858-z

Hair, JF, Black, WC, Babin, BJ y Anderson, RE (2019). Análisis de datos multivariados. https://researchdiscovery.drexel.edu/esploro/outputs/book/Multivariate-data-analysis/991019295303204721?institution=01DRXU_INST

Hernández-Sampieri, R., & Mendoza, C. P. (2018). Metodología de la investigación: Las rutas cuantitativa, cualitativa y mixta. McGraw-Hill Education.

Krafcik, J. F. (1988). Triumph of the lean production system. MIT Sloan Management Review, 30(1), 41. https://www.proquest.com/openview/a6938b5d5125c0061cc9881c8014c9bd/1?pq-origsite=gscholar&cbl=26142

Liker, J. (2020). El método Toyota: 14 principios de gestión del mayor fabricante del mundo . McGraw-Hill. https://katalog.ub.uni-heidelberg.de/cgi-bin/titel.cgi?katkey=68662771

Maynez, A. I., López, V. G., & Urías, A. J. (2024). La importancia de la gestión de recursos humanos para la manufactura esbelta. Estudios Gerenciales, 40(171), 193–203. https://www.icesi.edu.co/revistas/index.php/estudios_gerenciales/article/view/6450/4823 DOI: https://doi.org/10.18046/j.estger.2024.171.6450

Maware, C., & Parsley, D. M. (2022). The challenges of lean transformation and implementation in the manufacturing sector. Sustainability, 14(10), 6287. https://doi.org/10.3390/su14106287 DOI: https://doi.org/10.3390/su14106287

Netland, T. H. (2016). Critical success factors for implementing lean production: The effect of contingencies. International Journal of Production Research, 54(8), 2433–2448. https://doi.org/10.1080/00207543.2015.1096976 DOI: https://doi.org/10.1080/00207543.2015.1096976

Neto, F. M. (2013). Lean manufacturing: exposición adaptada a la fabricación repetitiva de familias de productos mediante procesos discretos. Bubok Publishing.

Ohno, T. (1988). Toyota production system: Beyond large-scale production. Productivity Press.

Shingo, S. (1981). A study of the Toyota Production System from an Industrial Engineering viewpoint (A. P. Dillon, Ed.). Productivity Press. https://doi.org/10.4324/9781315136509 DOI: https://doi.org/10.4324/9781315136509

Taherdoost, H. (2022). Designing a questionnaire for a research paper: A comprehensive guide to design and develop an effective questionnaire. Asian Journal of Managerial Science, 11(1), 8-16. https://ajmsjournal.org/index.php/ajms/article/view/3087 DOI: https://doi.org/10.51983/ajms-2022.11.1.3087

Tapia, J., Escobedo, T., Barrón, E., Martínez, G., & Estebané, V. (2017). Marco de referencia de la aplicación de manufactura esbelta en la industria. Ciencia & Trabajo, 19(60), 171–178. https://doi.org/10.4067/S0718-24492017000300171 DOI: https://doi.org/10.4067/S0718-24492017000300171

Taylor, F. W. (1911). The principles of scientific management. Harper & Brothers.

Toyoda, S. (1924). Automatic Loom (Type G) [Patent No. GB226068A]. British Intellectual Property Office / Japan Patent Office.

Toyoda, K. (1938). Just-in-Time: The Toyota Way of Production. Toyota Motor Corporation Internal Document (Manual de Operaciones para la Planta de Koromo).

Vargas, J. G., Muratalla, G., & Jiménez, M. (2016). Lean Manufacturing: ¿una herramienta de mejora de un sistema de producción?. Ingeniería Industrial. Actualidad y Nuevas Tendencias, (17), 153–174. https://www.redalyc.org/pdf/2150/215049679011.pdf

Womack, J. P., Jones, D. T., & Roos, D. (2007). The machine that changed the world: The story of lean production--Toyota's secret weapon in the global car wars that is now revolutionizing world industry. Simon and Schuster. https://books.google.com.co/books?hl=es&lr=&id=9NHmNCmDUUoC&oi=fnd&pg=PR7&dq=Womack,+J.+P.,+Jones,+D.+T.,+%26+Roos,+D.+(1990).+The+Machine+That+Changed+the+World:+The+Story+of+Lean+Production.+Rawson+Associates&ots=Uijz7hV2fg&sig=xDRm2SOBARrXSybam8gdzjB7l_8&redir_esc=y#v=onepage&q&f=false

Wren, D. A., & Bedeian, A. G. (2023). The evolution of management thought. John Wiley & Sons. https://books.google.com.co/books?hl=es&lr=&id=gkDUEAAAQBAJ&oi=fnd&pg=PA1&dq=Wren,+D.+A.,+%26+Bedeian,+A.+G.+(2020).+The+evolution+of+management+thought+(8th+ed.).+Wiley.+&ots=ggs7KdReZt&sig=V3K6EbgMms44WQPmFUGIvcJ-_Ks&redir_esc=y#v=onepage&q&f=false

Wu, H., & Leung, S. O. (2017). Can Likert scales be treated as interval scales?—A Simulation study. Journal of Social Service Research, 43(4), 527-532. https://doi.org/10.1080/01488376.2017.1329775 DOI: https://doi.org/10.1080/01488376.2017.1329775

Published

2026-05-18

Issue

Section

Artículos de investigación

How to Cite

Batista De Abreu, J., Ramírez Ospino, Y., & Perozo Martinez, E. (2026). Lean manufacturing: practice used by technology-based companies on the Colombian Caribbean coast. Telos: Revista de Estudios Interdisciplinarios en Ciencias Sociales, 28(2), 336-344. https://doi.org/10.36390/telos282.12